How to Change the Water Filter on a Whirlpool Refrigerator? Step by Step Guide

Gone are the days when refrigerators were single purpose. In this era of technology, now almost all the refrigerators have water filtering and ice dispensing technology which means you can fill up water bottles for workout, stay hydrated, and keep things refreshing and cool through them.

But for better water filtration and pure drinking water, you need to change the water filter after the lifespan of the filter ends. Today, in this article I will give you the complete instructions for this purpose. Hope, you will find this article understanding and beneficial for you.

Instructions for Replacing the Water Filter on Whirlpool Refrigerator

Replacing water filters can be difficult and complicated for new users. But not a big deal, you’ll master it once you know where the water filter is located in your refrigerator then you can follow the below mentioned steps to do the job for various types of water filters that you will encounter.

Filter Type 1 – Filter In the Base Grille

Some whirlpool refrigerators have their water filter installed in the base grille. In order to replace such water filters, here is the step by step guidance to follow.

1. First locate the water filter inside the refrigerator or in the base grille.
2. Lift the door of the filter up.
3. Now, pull the filter out and if it becomes a little difficult then push it first. Discard this old filter.
4. Open the new filter. Remove the protective coverings from the O-rings but make sure you keep the o-rings in place even after removing the covering.
5. Insert the new filter into the slot again and if it doesn’t go inside, easily rotate it a little until the notches are properly aligned with grooves but do not force the water filter. Also ensure the arrow on the water filter is pointing upward.
6. After inserting, push the filter door close so it fits into its place.
7. Once your water filter gets replaced, now flush the water filter for proper working.

Here is the link for the youtube video where you can see installation guide for filter type 1.

Filter Type 2 – Filter Inside the Refrigerator at Upper Right-Hand Corner

In some models of whirlpool, filters are placed inside the refrigerator at upper right-hand corner. Here is the step by step guidance which you can follow for replacing the filter for both filter type 2.

1. First locate the water filter inside the refrigerator at the upper right-hand corner.
2. To get the filter release, push the eject button on it.
3. Discard the filter after it gets released.
4. Open the new filter. Remove the protective coverings from the O-rings but make sure you keep the o-rings in place even after removing the covering.
5. Now, Place the filter cap on the new cartridge so the ridges get aligned. To snap and lock into place, turn the cap clockwise.
6. Insert the new filter into the slot and ensure the arrow is pointing to the left.
7. Keep pushing the filter in until it gets fit properly and the eject button pops out to the original place.
8. Once your water filter gets replaced, now flush the water filter for proper working.

Filter Type 3 – Filter at Left Side of the Refrigerator’s Base Grille

When filters are placed at the left side of the refrigerator’s base grille. Here is the step by step guidance which you can follow for replacing the filter for both filter type 3.

1. First locate the water filter inside the refrigerator at the upper right-hand corner.
2. To get the filter release, push the eject button on it.
3. Discard the filter after it gets released.
4. Open the new filter. Remove the protective coverings from the O-rings but make sure you keep the o-rings in place even after removing the covering.
5. Now, Place the filter cap on the new cartridge so the ridges get aligned. To snap and lock into place, turn the can clockwise.
6. Insert the new filter into the slot and ensure the arrow is pointing to the left.
7. Keep pushing the filter in until it gets fit properly and the eject button pops out to the original place.
8. Once your water filter gets replaced, now flush the water filter for proper working.

Here is the link for the youtube video where you can see installation guide for filter type 3.

Filter Type 4 – Filter at the Upper Right-Hand Corner of Your Refrigerator Interior

For the refrigerator in which water filters are placed at the upper right hand corner of your refrigerator interior. Here is the step by step guidance that you can follow for replacing filters.

1. Locate the water filter at the upper right hand corner of your refrigerator’s interior.
2. To open the cover on a small lever, if the tab in your refrigerator has a face outward then push on it by pulling the cover down. Similarly, if the tab is on the bottom of the cover then pull forward.
3. Remove the filter by turning to lift and pull. Discard the old filter.
4. Insert the new filter into the slot and push it in by turning right slightly to line it up with grooves.
   Note: if you’re installing for the first time, you will find a cap inside the slot. You can pull it out by turning counterclockwise.
5. Push on the filter to lock on its place and push the filter door up so that it snaps closed.
6. Once your water filter gets replaced, now flush the water filter for proper working.

Here is the link for the youtube video where you can see installation guide for filter type 4.

When Do You Need to Change the Water Filter?

Refrigerator’s water filters need to be replaced after every 3 to 6 months depending upon the durability and lifespan of the water filter. Such handy functions come with an additional responsibility to check the water filters routinely that either they are working properly or not. When the light indicator of water filter’s turns red it also means they need a replacement otherwise the delay will cause blockage or low water flow.

Replacing the refrigerator’s water filters is not a difficult job; you just have to follow the steps and determine which type of water filter fits in your refrigerator’s model.

Buying the Right Water Filter for You Whirlpool Refrigerator

For the replacement of the water filter, the very first job to do is buying the right water filter for your whirlpool refrigerator. Because if you don’t find the right one it will not fit perfectly in your model.

Here is the link from where you can buy the whirlpool replacement water filter for your refrigerator as specified by model.

Conclusion:

Changing the water filter of the refrigerator is a periodic job that you have to perform after every 3 to 6 months if you want to stay hydrated and enjoy fresh and crystal free pure drinking water.Hope, after reading the step by step guidance for replacing the water filter, now you can easily do the job for you. You just have to first determine the type of filter where it is located. You can also buy the replacement filter from the official whirlpool’s website through the link above mentioned.