Do you ever wonder about the smell of water? This is why because it’s not filtered water. So, According to the authorities, the water you get from your home may contain extremely high quantities of harsh chemicals, such as chlorine, copper, fluoride, and other dissolved toxic metals.
There are several ways you can filter water and remove harmful toxins, For that you have to choose a good water filter that will remove all germs and bacteria, and finally you will get pure water with the help of that water filter.
Know – how about your water condition
As the quality and technology of water filters changed and updated, it provided better quality to remove all harmful chemicals from water. Everyone wants to clean or filter their tap water without any compromise towards taste, efficiency, and affordability of water. There are several points which you should understand before choosing any water filter system for your water.
1. Evaluation of Water Needs
First of all, you have to know that what chemicals have existed in your water that you want to remove. At this point, 2 things should be considered. First, the POE system refers to Point of Entry, it tells about the water that comes into your home and is connected to your storage tank. Second, the POU system refers to Point of Use, it shows that when the water has been consumed. These filters can be installed externally.
2. To know about Types of POU
These filters consist of a pitcher filter, personal water bottle, and refrigerator filters. These can be located under a sink or the countertop.
3. Types of Contaminants
Contaminants are those particles which become the reason for bad smell and change in taste, due to which we want to do a water filter.
3.1 Taste and Odour Causing Contaminants
Sometimes you feel that water smells or tastes bad, it is not clean and gives a very unpleasant taste, it will become very harmful for health. This is caused by the release of air from GAC and it is reduced by the running water for several seconds before each use.
3.2 Rust and sediment
These are visible particles in your water, Sediments are collected at the bottom of the dishwasher. These are easily collected by high-quality water filters.
3.3 Bacteria and Pesticides
In houses, if water relies on well on, then it is likely to be contaminated by bacteria and pesticides. These occur in water naturally. Some bacteria and pesticides affect the taste and smell of your water. They can because a reason of illness. Water filters with high quality are available to remove these contaminants from your water accurately and effectively.
Selection of Water Filter
After understanding the water condition, Water filtration gives us the surety that water flowing has great taste and is purified. While selecting a water filter, you also need to consider the credibility and reputation of the company through which you want to buy the filter, Here, we discuss the main tips which play a vital role in the selection of better quality water filters.
1. Decide the type of Filter
The selection of water filters always depends on the type of contaminants in your water that you want to prevent through the filtration process. If your water comes from the main water line then you need to remove sediments, chemicals, and minerals from your water. If water comes to your home through private water well then you need to remove contaminants like hardness minerals and sediments. The correct selection of water filters is important to ensure that the water flows in your dispensers are completely filtered.
2. To know the Flow Rate of Dispensers
The flow rate is measured in gallons a minute. The flow rate tells us the amount of water that flows through your house dispensers like dish washes, showers, toilets, and hot water heaters. When you want to buy a filter, you have to know the all demands of specifications which are provided by the manufacturer of your water dispensers in your home. When the flow rate of water is lower than the required rate of water in the water filter system, it means that the pressure of water is low.
3. Size of Filter
While choosing a water filter, you also need to know about the size of the filter that you want. A big water filter is considered as best because it gives us long-term service and more supply of water. The port size of the filter is also considered an important factor because it shows the impact on the gallons minute and the pressure of water that flows into your house. The ideal size of filter for the average home is 4.5” *20”. For large filters, they need to install filters with a flow rate of 25gpm and 1 ½ inch pots.
3.1 Need to know about life of Filter
The life of the filter depends on the position of water that you want to filter. When you want to buy a water filter system you should be considered the quality or quantity of sediment in the water. The life of the filter also examined by the amount of water that it can be filtered before the replacement.
3.2 Certified Water Filter System
While considering all important factors, you also need to make sure that the filter system which you buy is must be certified. The size of the filter is not an issue, but it must be certified. When you buy it, you must check the seal, which shows that the water filter system has been tested and approved by the authorities.
So, all these points help you for the selection of the best Certified quality water filter system that purified water effectively.
A water filtration system is a great choice to provide clean and purified water to your family The best quality filter gives you the best quality of water that you desire
Table of Contents